IsoBuster 1.6.0.18 -CDImages bearbeiten u. mehr

Software

Mit IsoBuster ist es möglich, nahezu alle Arten von CD-Images zu entpacken. So kann man schauen, ob sich wirklich die richtigen Daten darin befinden, ohne einen Rohling zu verschwenden


Durch einen Klick auf den Screenshot wird dieser vergrößert dargestellt!

Das sind die Programm-Features:
- Data recovery from CD and DVD.
- Better Error handling and several retry-mechanisms to aid you in getting the data anyway.
- The use of both generic and alternative ways to get to the data, get the best out of your CD/DVD-ROM drive.
- The use of secondary file-systems to get to the data and/or make use of file system data that might be ignored or ‘forgotten’ by popular OS.
- CDs stay 'readable' after problems (such as Buffer Under-run). Read from open sessions, ... .
- Read and Extraction of files, CD/DVD images, tracks and sessions from all optical media.
- Supports : CD-i, VCD, SVCD, CD-ROM, CD-ROM XA, CD-R, CD-RW, ...
- Supports : DVD-ROM, DVCD, DVD-RAM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL ...
- Scanning for lost UDF files and folders.
- Find lost data on CD or DVD created with drag and drop applications (e.g. Direct CD, InCD, DLA, Instant-Write, Packet CD, Drag to Disc, FileCD, abCD, ...).
- Find lost pictures created and saved to CD with Mavica, other digital cameras or other devices with embedded UDF write functionality.
- Auto find extensions based on file content to try and give an appropriate name to an orphaned file. This built in file identifier assigns the proper extension to the file so that Windows applications can open the file. Only needed for orphaned files without a name.
- Support for Direct CD compressed files. Decompression on the fly.
- Support for Mount Rainier CD-RW and DVD+RW discs in MRW compatible and non-MRW compatible drives. Auto detection and automatic remapping which can be switched of or forced at all times.
- Support for formatted CD-RW discs mounted in very old drives that do not know the CD-RW fixed packet format yet. Auto detection and automatic remapping which can be switched of or forced at all times
- Recover data from blanked or quick formatted DVD+RW media.
- Mpg (*.dat) Extraction and dat2mpg 'in one'.
- Enormous file system coverage and different ways to use them all (find the one suited best for your needs).
- ISO9660, Joliet, Romeo (Short File-names vs. Long File-names on mastered CDs)
- Big Endian (Motorola), Little Endian (Intel) (Windows vs. Unix, Mac and other systems' defaults)
- UDF 1.02 (e.g DVDs), UDF 1.5 (e.g. Packet writing on CD-R and CD-RW), UDF 2.01, 2.50, ...
- Rock Ridge (e.g. for Commodore users)
- Information and file system properties (must for FS developers)
- CD/DVD Surface scan to see if there are physical read errors.
- Opens checksum files (*.md5) and automatically verifies the image with the checksum file.
- Check if all files and folders are readable without having to extract all data to HD.
- Single sector extraction. Extraction of CD/DVD parts, fit to your needs (Engineering purposes)
- Sector Viewer. Check a sector's content in IsoBuster's editor and print or save to HD.
- Compile (and edit, save, print) lists of all files that contain physical read errors.
- Compile lists of all files, including their Logical block address (ideal to find the logical play order for mp3 CDs)
- CD-Text support from CD, *.PXI, *.CCD, *.B5T and *.CUE image files.
- Creation of image files (*.iso, *.bin, *.tao)
- Creation of checksum files (*.md5)
- Creation of cuesheet files (*.cue)
- Conversion of image files
- Handles opening of multi-file image files.
- Creation of multi-file image files or disc spanning to specified size
- Many other neat features the OS doesn't offer.
- Comprehensive help file
- Supports an enormous range of image files (see further)
- ...

Das ist neu in dieser Build:

New:

- Support for UDF 2.50, the newest version of the UDF standard.

- Support for DVD+R DL (Dual Layer DVD+R)

- Implementation of an embedded Method 3 (Mount Rainier) remapper for CD-RW.

- Implementation of an embedded Method 3 (Mount Rainier) remapper for DVD+RW.

- Automatic detection of Mount Rainier CDs and DVDs in none-capable Mount Rainier drives.

- Ability to force Mount Rainier remapping (Options menu)

- Online check to see if there is a more recent version available (Check per day, week, ... , never)

- Added support for Virtual CD image files (*.vc4 and *.000 images)

  - Open via the *.vc4 (track/session descriptor file) to get the proper track/session layout.  

  - Open the *.000 (data container file) to treat as an ordinary image without extra layout data.

- Added support for BlindWrite CD/DVD image files (*.b5t and *.b5i images)

  - Open via the *.b5t (track/session descriptor file) to get the proper track/session layout.  

  - Open the *.b5i (data container file) to treat as an ordinary image without extra layout data.

- Integration of MD5 Checksum files.

  - Creation of MD5 checksum file (.md5) of the currently opened image

  - Creation of MD5 checksum file (.md5) for potential (future) image files extracted a certain way

  - Verify if currently opened image file's checksums match with checksums in checksum file (.md5)

  - Opening IsoBuster with an .md5 file or dragging an .md5 file onto IsoBuster will trigger

    IsoBuster to load the image file in the .md5 file and IsoBuster will do a verify automatically.

  - Options to automatically create an MD5 checksum file after image file extraction.

  - Fully supports image files which consist of multiple files, including cuesheet files etc.

- The progress bar now shows the progress of the entire operation instead of object per object.  

  For nostalgic reasons, should you like the older approach better,

  an option to switch this back to object per object is available in the Options menu (GUI).

- The File and Directory Time Zone information, stored in the file-systems, is now taken in account

  - to display the time in the ListView (right pane)

  - and to assign a time stamp to an extracted file.

  This way IsoBuster does the same as Windows NT, 2K, XP as opposed to Windows 9x.

- For investigative or nostalgic reasons the local time stamps can still be seen and applied during

  extraction via the Options Menu (Options / File Systems / General)

- The second tab of the properties window for a file or directory now shows the time zone 

  of where the file was put on disc.

- When multiple files are extracted, and one or more files already exist, IsoBuster now offers,

  besides the already existing option "Yes to All", a "No to All" option

  on the question whether files need to be overwritten or not.

- In case of a corrupt UDF 1.5 file-system on CD-R with a missing VAT

  IsoBuster's default setting is to start looking for that VAT.  

  This can take a while when there are a lot of errors on the disc.  

  An option has been added to stop the search if there are too many errors.  

  Default this option is set to 'On'.

- DLA has this habit of locking a device when it 'likes' the inserted CD or DVD, 

  even though no writing or so is done to the media.

  This prevents any commands being sent to the locked drive by applications 

  which were started after the lock was applied.

  As a result IsoBuster could not find the drive because even the simplest of commands 

  were rejected.

  As of this version the lock is penetrated via negotiation with DLA drivers.  

  Now, if IsoBuster has control, DLA will not write to the media until IsoBuster is closed again.

Improvements :

- Sometimes Windows passes a short file name (8.3) of an image file to the program, 

  depending on how it is done.

  This can cause IsoBuster to not be able to find the 'attached' files when the file 

  is the first file of a multi-file image.

  A workaround to deal with this problem has been implemented.

- Workaround for devices that return Full TOC data which is not MMC compliant.

- More file-types added to the automatic file-type recognition feature for orphaned files.

- Improved compression in the installer which cuts more than 1 MB of the 'all languages version'.

- Small speed improvement during the actual scanning for lost UDF files and folders.

  Probably only noticeable on DVDs.

- Significant speed improvement during the last part of the scanning for lost files and folder,

  the so called sanitizing part.  Especially noticeable on large recovered data-sets on DVDs.

- Directory content displayed in the right ListView pane is build up dynamically now,

  based on what the user sees.  So in case of very large directories, e.g. 10,000 files or more,

  building up the content is now very fast in comparison with older versions.

- Rewrite of part of the internal file-directory-data-management which probably won't be noticed

  but helps for future functionality.

- Small GUI changes and improvements, e.g. build number mentioned in the About box.

- Help Button on the registration window.

- Prompt the user on Cue-sheet file creation when the file already exists 

  and is going to be over-written.

- Ability to ignore certain errors 'always' in case of a corrupt ISO9660 or Joliet File-System.

  Sometimes you could get certain errors for every directory or so,

  now you can make a selection for all subsequent errors as well.

- Improvements in the UDF scan "Find lost UDF files and folders" in case the partition start address

  cannot be determined via any surviving structures.

- On Extraction, when the file(s) already exist the user is asked to over-write or not.  

  When the user selected 'Yes' but the file was write-protected the file could still not be over-written

  (The program would put up an error message).  

  Now, when the user says to over-write a file, even when the file is write-protected,

  the file will be over-written as asked.

Bug Fixes :
 

- IsoBuster could run into a memory problem during the search for lost UDF files 

  and in case of large data-sets,

  e.g. DVDs with 200,000 lost files or more.  

  The problem could not be repeated on CDs because of the limited capacity.  

- The progress bar during the finding of missing file extensions was not always working properly.

- The progress bar during the check to see if all files are physically readable 

  was not always working properly.

- A memory management issue during the finding of missing file extensions 

  could kill the speed on very large data-sets,

  e.g. DVDs with +200,000 missing files.

- Following is far fetched but under WinNT,2K and XP, when the user would switch from Aspi to SPTI

  or vice versa during the actual extraction of an object the program would crash.  

  Now switching can be done but the object extraction will continue 

  via the previously selected interface.

- Recognition of certain single file *.gi image files was broken in version 1.5

- An exception error during interpreting of certain corrupt UDF file-system data could occur 

  and has been fixed.

- In case of auto-remap-detection on older SCSI drives the program could crash

  due to a 'Stack Overflow' problem.

- Fixed another problem that can occur with older SCSI drives.  

  This problem can occur when the CD has less than 2 tracks and

  IF it occurs it occurs with unpredictable behaviour.

- Rare exception error that could occur when an ISO9660 file system was corrupt 

  and if the user chose to keep parsing doubtful data after being prompted a few times.

- Rare exception error that could occur while scanning for lost UDF files and folders due

  to unexpected corrupt data in certain UDF data structures.

- When an image file contained 2048 bytes/block the last block could not be read in raw mode.

  Only raw was a problem, the user data could still be extracted normally.

- When an image file contained 2048 bytes/block and the user extracted raw,

  the user data was always converted to M2F1 data in the raw image despite 

  a possible M1 track mode.

  This has been corrected.  If the track mode is M1, the raw image will contain M1 as well.

News-Submiter: Studdy
Verkaufspreis:
Das Programm ist Freeware.
Weitere Infos:www.smart-projects.net/
Download:Software-Download


Bedenken Sie bevor Sie einen Kommentar schreiben, dass Kommentare nur im unmittelbaren Zusammenhang mit der News stehen sollen - für andere Sachen ist das Forum da - WinFuture.de behält sich vor, unpassende Kommentare zu löschen und im Wiederholungsfall oder bei verbalen Entgleisungen dem WinFuture-Gast ggf. die Kommentarrechte, temporär oder auf Dauer zu entziehen!
Diese Nachricht empfehlen
Kommentieren8
Jetzt einen Kommentar schreiben


Alle Kommentare zu dieser News anzeigen
Kommentar abgeben Netiquette beachten!

Jetzt als Amazon Blitzangebot

Ab 14:40 Uhr Narrow Box 4K
Narrow Box 4K
Original Amazon-Preis
199,90
Im Preisvergleich ab
?
Blitzangebot-Preis
149,90
Ersparnis zu Amazon 25% oder 50
Nur bei Amazon erhältlich

Video-Empfehlungen

WinFuture Mobil

WinFuture.mbo QR-Code Auch Unterwegs bestens informiert!
Nachrichten und Kommentare auf
dem Smartphone lesen.

Tipp einsenden